Made in USA
The Embedded Solutions Experts

  1. Home
  2. IndustryPack
  3. IP Mounting Hardware

IP Mounting HW - Stainless Steel Standoffs and Screws

Order This Item
Quantity

IP-Hardware Description


All Hardware is Stainless Steel
IP Mounting screws (4 flat head screws M2)
Carrier board (host) mounting screws (4 pan head screws M2)
Standoffs (4 standoffs with correct height and diameter to mate IP module with Carrier .354" (9mm) x .156" M2x0.4)

Please note: Dynamic Engineering Carriers come with the standoff´s installed with the pan head screws. Dynamic Engineering IP Modules come with the flat head screws. No need for the kit unless you lose HW or use 3rd party devices which may come without screws or standoffs etc.

HDRterm50 Features

Size
5.475" x 2.878" for std and -ENG models without housing.
Characteristics
1:1 from header pin to Screw Terminals.
Mounting
Available with plastic housing and DIN Rail mounting system or sans plastic with standoff mount.

HDRterm50 Benefits

Ease of Use
Snap together system with HDRribn50 and HDRterm50. Plug into DIN raii system or screw down with standoff mounting. Second box header connector [optional] available to pass through HDRterm50, allow for termination or additonal connections.
Price
HDRterm50 is available at a reasonable price and lead time. See the on-line storefront at the top of this page.
Availability
Dynamic Engineering keeps stock of the standard options. For custom versions: a short lead time for our in house manufacturing staff to make yours.
Compatibility
HDRterm50 can be used with flat ribbon, twisted pair ribbon, and discrete wiring terminated in a header . Many interface possibilities.

Part Number:IP-Hardware
Ordering Options

    IP-Connector-Saver: Comes with 2 Connector Savers plus 4 standoffs and mounting screws. Add .534" air gap between the installed module and carrier.


    Other related models: IP-Debug-Bus is a test aparatus installed between the carrier and IndustryPack to allow the control / data signals to be monitored, hot swapped etc. , IP-Debug-IO is an adapter for the IP Module IO connector. Mates with the IndustryPack connector on one side and ribbon cable on the other. Ribbon Cable 50 pin can be used to connect to the IP-Debug-IO and your system or perhaps finish it off with HDRterm50 which converts 50 pin ribbon to screw terminal.

Custom Length SCSI Cable

Send us an e-mail - sales@dyneng.com with your requirements. Be sure to include the length, retention [clip / screw], and quantity. Please be aware that custom lengths will take several weeks to process. Pricing is quantity sensitive.

HDRterm50 Additional Information

Reference Statement of Volatility