|
|
|
|
|
|
|
|
|
|
|
|
|
|
PMC Products |
Return to the Dynamic Engineering WebSite |
CPCI2PMC The cPCI2PMC ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCI2PMC has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. |
CPCIBPMC3U64 The cPCIBPMC ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCIBPMC has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. The 3U card is wired for 64 bit PCI operation with pull-ups on the control lines to allow use in a 32 bit system. The PMC bezel connector is mounted though the cPCI mounting bracket. |
CPCIBPMC3U64-ET The cPCIBPMC3U64ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCIBPMC3U64ET has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. The 3U card is wired for 64 bit PCI operation with pull-ups on the control lines to allow use in a 32 bit system. The PMC bezel connector is mounted though the cPCI mounting bracket. The cPCIBPMC3U64ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option. |
CPCIBPMC6U-ET The cPCIBPMC6U-ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install 2 PMC cards into a standard cPCI slot. The cPCIBPMC6U-ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option. |
Cable-MDM9-Spacewire Spacewire Cable for Lab and/or Testing environments |
Cable-MDM9-Wizard PMC Wizard Cable for Lab and/or Testing environments |
DESWCB SpaceWire Connector Board |
| |
HDETerm68 SCSI II/III to 68 Terminal positions SCSI II/III adapter to terminal strip with DIN rail and custom termination options |
HDEcabl68 SCSI II/III cable - 68 pin high density SCSI connectors with latch blocks or 2-56 thumbscrew hardware in 3 ft. and 6 ft. lengths. Twisted pair construction. Use with PMC hardware such as Dynamic Engineering's PMC-parallel-IO etc. |
PCI Riser Card PCI Riser Card |
| PCI card with PMC Compatible SpaceWire Interface |
PCI2PMC 1/2 length PCI adapter carrier card with PMC mounting slot. Front panel and Pn4 IO access. 32 / 64 bit operation. |
PCIBPMC PCIBPMC: Order for a base version PCIBPMC-SCSI: Order for a SCSI Connector version PCIBPMC-ENET: with 2 ethernet ports installed; PCIBPMC-SER: with serial connectors installed; PCIBPMC_RJ45&Ser: with Serial & Ethernet; PCIBPMC-VIO3:; PCIBPMC-SCSI-VIO3:; PCIBPMC-ENET-VIO3: with 2 ethernet ports, 3.3V; PCIBPMC-SER-VIO3: with serial con 3.3V; PCIBPMC-Customized: We cater to our customers special orders - please email your requirements for a PCIBPMC with modifications to meet your needs dedra@dyneng.com PCIBPMC Fan Options no fan installed;n PCIBPMC-FAN1 closest to the PCI bezel; PCIBPMC-FAN2 closest to the PMC Connectors; |
PCIBPMCx2 PCIBPMCx2-Customized: We cater to our customers special orders - please email your requirements for a PCIBPMC with modifications to meet your needs dedra@dyneng.com PCIBPMCx2 Order the PCIBPMCx2 for a base version (PCIBPMCx2-VME) PCIBPMCx2-FAN() Need additional cooling? order for a pre-installed 12V 8CFM fan(s) to maximize cooling and funtionality of your card. The fan has been tested with high wattage prPMC devices. Fan position 1 is closest to the PCI bezel, 2,3, and 4 are numbered from left to right. Valid Fan options include: (1), (2), (3), (4), (13), (14), (23), (24) PCIBPMCx2-ENET receive with 2 ethernet ports installed. The connectors are added to work with Ethernet equipped PMC's PCIBPMCx2-SER receive a PCIBPMCx2 with a serial connector installed . The Serial Port connectors are added to work with serial port equipped PMC's PCIBPMCx2-SCSI receive with the SCSI connectors mounted for Pn4 IO.[no VME] PCIBPMCx2-NC This model has no VME or SCSI connector installed. PCIBPMCx2 Order combinations of the above options by simply adding the extension(s) to your order request. Some combinations are incompatible [-SCSI, -NC] |
PIM-Carrier The PIM Carrier board facilitates 2 PIM's. The PIM Carrier facilitates rear panel IO in cPCI based systems using PMC's Need a cPCI card..we have those too www.dyneng.com/cpci.html |
PIM-Parallel-IO The PIM-Parallel-IO facilitates rear panel IO. A PIM Carrier is mounted to the underside of the backplane. The Pn4 [PMC] IO is passed through the backplane connectors to the PIM Carrier and to the installed PIM devices. Most PIM Carriers have two PIM sites which correspond to the two PMC's mounted to the host card. The PIM (PMC Interface Module) carrier supports the flexible PIM scheme for PMC rear I/O. |
PIM-Universal-IO The purpose of the PIM-Universal-IO is to facilitate rear panel IO in cPCI systems. A PIM Carrier is mounted to the underside of the backplane. The Pn4 "user IO" on the PMC is routed through the host "carrier" board to the backplane.is passed through the backplane connectors to the PIM Carrier and to the installed PIM devices. The PIM (PMC Interface Module) carrier supports the flexible PIM scheme for PMC rear I/O. |
PMC-BiFIFO The parallel Input and Output channels are highly programmable and fully independent. The standard interface offers Data, Clock and Strobe. The 32 RS485 channels are programmable as input or output allowing for a variety of implementations. The programmable output rates and RS422/485 compatability will interface to a multitude of systems. If your situation demands a custom application then we will update the Xilinx FPGA. Send us your timing and we will send you the interface.... email us your wish list or call today! |
|
PMC-BiSerial provides 20 independent RS485 IO in one PMC slot plus FIFO memory and state machine control. Basic design provides independent RX and TX differential serial IO at up to 12 MHz. Custom state machine designs. In Stocknot recommended for new designs Please refer to the PMC-BiSerial II or III for all new development |
PMC-BiSerial-II NG1 PMC Biserial II NG1 features multiple serial protocols |
PMC-BiSerial-II-NVY2 128K X 32 FIFO's provides multiple serial protocols. The Nvy protocol implemented provides Manchester encoded data inputs and outputs. |
PMC-BiSerial-III The PMC BiSerial has been updated to be even better. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-III. The BiSerial III features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. 34 - 40/200 MHz 485/LVDS buffers with programmable termination and direction can be configured to your systems requirements. An expanded faster FPGA will implement the most complex state-machines. |
|
PMC-BiSerial-IO-II PMC-BiSerial-II (16Kx32FIFO)Standard. The PMC BiSerial has been updated to be even better. Building on the knowledge and experience gathered from multiple IP and PMC BiSerial implementations and adding in the latest technology has created the PMC-BiSerial-II. The BiSerial II features completely isolated FIFOs with 32 bit ports for increased adaptability and performance. 32 - 20/40 MHz 485 buffers with programmable termination and direction can be configured to your systems requirements. An expanded faster FPGA will implement the most complex state-machines. The connector pinouts are the same for the first 20 channels to help with migration of older designs. |
PMC-ExtendIO-II PMC extender board/cable set |
PMC-MC-X2-no pwr supply PMC Mini Carrier with 2 positions. 32 / 64 bit operation, internal power supplies, arbitration etc. |
|
PMC-Parallel-485 Provides 32 independent RS485 IO in one PMC slot plus clock reference and clock enable. All IO can be interrupt sources. Custom state machine designs. |
PMC-Parallel-IO PMC-Parallel-IO provides 64 independent IO in one PMC slot. |
PMC-Parallel-TTL PMC-Parallel-TTL provides 64 independent IO in one PMC slot. |
PMC-Serial PMC-Serial / PMC-4U / UART channel board The PMC-Serial provides a highly flexible communications interface with synchronous and asynchronous serial protocols UART and SCC Replace several cards with one to save time, cards, slots and dollars. |
|
PMC-Spacewire PMC-SpaceWire provides a SpaceWire interface with FIFO buffering on a PMC. |
PMC-Wizard PMC-Wizard is intended to be used in ultra high-speed bidirectional point-to-point data transmission systems. |
PMC-XM PMC Transition Module for IO, PLL and RAM support The PMC-XM is intended for use in situations where the user wants to control the design. |
PMC2PCI Adapter/carrier card mounts in a PMC slot and provides a PCI slot. |
PC104p2PMC The PC104p2PMC ( PCI-104 to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard PCI-104 slot |
PMC-X2-Chassis 2 position PMC Mini Carrier Chassis |
PMC-X4-Chassis 4 position PMC Mini Carrier Chassis. 28v chassis and power supply are the default. |
PCIeBPMCx1 The PCIeBPMCX1 ( PCIe Bridge PMC 1 slot) adapter / carrier converter card provides the ability to install one PMC card into a standard PCIe 1 or 4 lane slot. Suitable for PCI or PCI-X operation with the PMC; 32 bit or 64 bit data and 33, 66, 100 or 133 MHz. clock. Auto selected or switch programmable speeds. |
Return to the Dynamic Engineering WebSite |
