 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carriers/Adapter Products |
Return to the Dynamic Engineering WebSite |
CPCI2IP cPCI2IP is a 3U 4HP cPCI [CompactPCI] design with 2 IP slots. |
CPCI2PMC The cPCI2PMC ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCI2PMC has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. |
CPCI4IP cPCI4IP is a 6U 4HP cPCI [Compact PCI] design with 4 IP slots |
CPCIBPMC3U64 The cPCIBPMC ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCIBPMC has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. The 3U card is wired for 64 bit PCI operation with pull-ups on the control lines to allow use in a 32 bit system. The PMC bezel connector is mounted though the cPCI mounting bracket. |
CPCIBPMC3U64-ET The cPCIBPMC3U64ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCIBPMC3U64ET has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. The 3U card is wired for 64 bit PCI operation with pull-ups on the control lines to allow use in a 32 bit system. The PMC bezel connector is mounted though the cPCI mounting bracket. The cPCIBPMC3U64ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option. |
CPCIBPMC6U-ET The cPCIBPMC6U-ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install 2 PMC cards into a standard cPCI slot. The cPCIBPMC6U-ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option. |
| SpaceWire Break-Out (DESWBO) Monitors the signals of a single SpaceWire link |
DESWCB SpaceWire Connector Board |
| The DINribn64 cable set is designed to interconnect devices using 64 connection DIN connectors. Rows A and C are utilized. Many Dynamic Engineering products have this connector system as well as products from third parties for VME systems. Utilize the DINribn64 cable to connect the DINterm64 to the PCIBPMC, PCIBPMCX2, PCI2PMC etc. A snap together breakout system with DIN rail capability is created with these components. You can also use the DINribn64 to interconnect your rear IO VME hardware to the DINterm64 or other breakout device. |
DinTerm64 DINterm64 provides a space efficient, low cost method of interconnecting the control electronics to the rest of the sensors, IO, machinery etc. |
| |
HDEcabl68 SCSI II/III cable - 68 pin high density SCSI connectors with latch blocks or 2-56 thumbscrew hardware in 3 ft. and 6 ft. lengths. Twisted pair construction. Use with PMC hardware such as Dynamic Engineering's PMC-parallel-IO etc. |
HDRribn50 50 pin ribbon cable with connectors, strain relief and pull tabs (Please specify length on order page) |
HDRterm50 |
IP-CompactFlash IP to CompactFLASH adapter card with one CompactFLASH socket using true IDE mode interface. Second slot available via transition module |
PC104p2PMC The PC104p2PMC ( PCI-104 to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard PCI-104 slot |
PC104p4IP PC104p4IP is a PC/104+ carrier design with 4 IP slots |
PC104pIP PC104pIP is a PC/104+ carrier design with 1 IP slot |
PCI Riser Card PCI Riser Card |
| Use your PC/104p boards in a standard PC. Two orientations supported for production mode and test. |
PCI2PMC 1/2 length PCI adapter carrier card with PMC mounting slot. Front panel and Pn4 IO access. 32 / 64 bit operation. |
PCI2cPCI-32 PCI2cPCI-32 Install a cPCI board into a PCI slot. This adapter supports 32-bit |
PCI2cPCI-64 PCI2cPCI-64 Install a cPCI board into a PCI slot. This adapter supports 64-bit |
PCI3IP 1/2 size PCI card with 3 Industrypack compatible slots. |
PCI5IP PCI5IP is a full length universal voltage signaling PCI card with 5 IP slots. |
PCIBPMC PCIBPMC: Order for a base version PCIBPMC-SCSI: Order for a SCSI Connector version PCIBPMC-ENET: with 2 ethernet ports installed; PCIBPMC-SER: with serial connectors installed; PCIBPMC_RJ45&Ser: with Serial & Ethernet; PCIBPMC-VIO3:; PCIBPMC-SCSI-VIO3:; PCIBPMC-ENET-VIO3: with 2 ethernet ports, 3.3V; PCIBPMC-SER-VIO3: with serial con 3.3V; PCIBPMC-Customized: We cater to our customers special orders - please email your requirements for a PCIBPMC with modifications to meet your needs dedra@dyneng.com PCIBPMC Fan Options no fan installed;n PCIBPMC-FAN1 closest to the PCI bezel; PCIBPMC-FAN2 closest to the PMC Connectors; |
PCIBPMCx2 PCIBPMCx2-Customized: We cater to our customers special orders - please email your requirements for a PCIBPMC with modifications to meet your needs dedra@dyneng.com PCIBPMCx2 Order the PCIBPMCx2 for a base version (PCIBPMCx2-VME) PCIBPMCx2-FAN() Need additional cooling? order for a pre-installed 12V 8CFM fan(s) to maximize cooling and funtionality of your card. The fan has been tested with high wattage prPMC devices. Fan position 1 is closest to the PCI bezel, 2,3, and 4 are numbered from left to right. Valid Fan options include: (1), (2), (3), (4), (13), (14), (23), (24) PCIBPMCx2-ENET receive with 2 ethernet ports installed. The connectors are added to work with Ethernet equipped PMC's PCIBPMCx2-SER receive a PCIBPMCx2 with a serial connector installed . The Serial Port connectors are added to work with serial port equipped PMC's PCIBPMCx2-SCSI receive with the SCSI connectors mounted for Pn4 IO.[no VME] PCIBPMCx2-NC This model has no VME or SCSI connector installed. PCIBPMCx2 Order combinations of the above options by simply adding the extension(s) to your order request. Some combinations are incompatible [-SCSI, -NC] |
PCIeBPMCx1 The PCIeBPMCX1 ( PCIe Bridge PMC 1 slot) adapter / carrier converter card provides the ability to install one PMC card into a standard PCIe 1 or 4 lane slot. Suitable for PCI or PCI-X operation with the PMC; 32 bit or 64 bit data and 33, 66, 100 or 133 MHz. clock. Auto selected or switch programmable speeds. |
PIM-Carrier The PIM Carrier board facilitates 2 PIM's. The PIM Carrier facilitates rear panel IO in cPCI based systems using PMC's Need a cPCI card..we have those too www.dyneng.com/cpci.html |
PIM-Parallel-IO The PIM-Parallel-IO facilitates rear panel IO. A PIM Carrier is mounted to the underside of the backplane. The Pn4 [PMC] IO is passed through the backplane connectors to the PIM Carrier and to the installed PIM devices. Most PIM Carriers have two PIM sites which correspond to the two PMC's mounted to the host card. The PIM (PMC Interface Module) carrier supports the flexible PIM scheme for PMC rear I/O. |
PIM-Universal-IO The purpose of the PIM-Universal-IO is to facilitate rear panel IO in cPCI systems. A PIM Carrier is mounted to the underside of the backplane. The Pn4 "user IO" on the PMC is routed through the host "carrier" board to the backplane.is passed through the backplane connectors to the PIM Carrier and to the installed PIM devices. The PIM (PMC Interface Module) carrier supports the flexible PIM scheme for PMC rear I/O. |
PMC-ExtendIO-II PMC extender board/cable set |
PMC-MC-X2-no pwr supply PMC Mini Carrier with 2 positions. 32 / 64 bit operation, internal power supplies, arbitration etc. |
PMC2PCI Adapter/carrier card mounts in a PMC slot and provides a PCI slot. |
cPCI-J2-SCSI cPCI-J2-SCSI connector board[CompactPCI] |
Return to the Dynamic Engineering WebSite |
