 |
 |
|
|
|
|
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IndustryPack Products |
Return to the Dynamic Engineering WebSite |
CPCI2IP cPCI2IP is a 3U 4HP cPCI [CompactPCI] design with 2 IP slots. |
CPCI4IP cPCI4IP is a 6U 4HP cPCI [Compact PCI] design with 4 IP slots |
IP BiSerial IP-BiSerial provides bi-directional serial IO at rates up to 10 Mhz. Separate highly programmable send and receive state machines and memories. IndustryPack campatible with 8 or 32 Mhz. bus operation. We do custom versions. Send us your specs. and we will do the rest. You can customize the design too with IP- Xilinx |
IP Crypto The IP Crypto is a special version of the IP-Parallel-HV. The basic design features are retained and an interface to a KYK-13 is provided. using 6.5V reference output, a transfer request output, and 3 inputs for clock, data and switch. |
IP Mounting Hardware Mounting Hardware for IP Modules |
IP OctalSerial IP-OctalSerial has 8 FIFO supported differential IO channels and a large programmable Xilinx FPGA to support custom state-machine implementations. |
IP-429 Connect to your Avionics with IP-429. Pick 2,4,6,or 8 ARINC 429 compatible receivers and 1, 2, 3, or 4 transmitters. Transorb protected IO. Software programmable transmit rates [100K or 12.5K]. Time Tag on received data. IndustryPack campatible with 8 or 32 Mhz. bus operation. -40 to 85C Standard Temperature range |
IP-CompactFlash IP to CompactFLASH adapter card with one CompactFLASH socket using true IDE mode interface. Second slot available via transition module |
IP-DEBUG-BUS Gain access to all of the IndustryPack Bus signals with the IP-Debug-Bus |
IP-Debug-IO-II IP IO Connector Break-out Adapter |
IP-OptoISO-16 IP Module with Optically Isolated Output control. 0-60V, 1.5A |
|
IP-Parallel-HV High Voltage [up to 30V] IP Compatible card with 48 programmable IO. 40 mA sink. Open collector interface. Interrupt generator on each input channel. Filtered or direct input. |
IP-Parallel-IO IP Compatible card with 48 programmable TTL IO or 24 - RS422 / RS485 compatible differential pairs. 5 mixed combinations available. Filtered or direct input. Programmable interrupt from each IO [TTL or differential]. 2 counter timers. Waveform generator. |
|
IP-Pulse IP Compatible card with 4 programmable pulse generators. TTL or RS422 / RS485 compatible outputs. Programmable pulse - nS to seconds. Programmable count or free running. |
IP-Quad-UART IP Module with quad UART capability. 128 byte FIFOs, 8 & 32 MHz operation, RS232 and RS422/RS485 interface, programmable terminations, 1.5MHz - 100 Hz. |
IP-QuadUART-485 IP Module with quad UART 485 capability |
PC104p4IP PC104p4IP is a PC/104+ carrier design with 4 IP slots |
PC104pIP PC104pIP is a PC/104+ carrier design with 1 IP slot |
PCI3IP 1/2 size PCI card with 3 Industrypack compatible slots. |
PCI5IP PCI5IP is a full length universal voltage signaling PCI card with 5 IP slots. |
| |
HDRribn50 50 pin ribbon cable with connectors, strain relief and pull tabs (Please specify length on order page) |
HDRterm50 |
| The IP-1553 is a 1553 Single & Dual Redundant BC, RT & Monitor capabilities |
| IP-CAN: IndustryPack w/2 CAN [Controller Area Network] channels |
Cable Assembly Crypto/Tape The Cable Assembly Crypto / Tape provides a method of interconnecting the IP-Crypto and IP-Tape from the carrier to the PCI Bezel [rear IO] when installed into a PCI machine. Most IP Carriers have 50 pin headers suitable for ribbon cable in use for the IP Module IO. The headers are located on the carrier and internal to the chassis. Interconnecting to the outside world can be an issue |
Return to the Dynamic Engineering WebSite |
