|
|
|
|
|
|
|
|
|
|
|
|
|
|
cPCI Products |
| cPCI Products offered by Dynamic Engineering
Return to the Dynamic Engineering WebSite |
CPCI2IP cPCI2IP is a 3U 4HP cPCI [CompactPCI] design with 2 IP slots. |
CPCI2PMC The cPCI2PMC ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCI2PMC has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. |
CPCI4IP cPCI4IP is a 6U 4HP cPCI [Compact PCI] design with 4 IP slots |
CPCIBPMC3U64 The cPCIBPMC ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCIBPMC has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. The 3U card is wired for 64 bit PCI operation with pull-ups on the control lines to allow use in a 32 bit system. The PMC bezel connector is mounted though the cPCI mounting bracket. |
CPCIBPMC3U64-ET The cPCIBPMC3U64ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install a PMC card into a standard cPCI slot. The cPCIBPMC3U64ET has a PMC card slot mounted to a universal 3U 4HP cPCI card. Suitable for 32/64 with 33/ 66 MHz bus operation. The 3U card is wired for 64 bit PCI operation with pull-ups on the control lines to allow use in a 32 bit system. The PMC bezel connector is mounted though the cPCI mounting bracket. The cPCIBPMC3U64ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option. |
CPCIBPMC6U-ET The cPCIBPMC6U-ET ( cPCI to PMC ) adapter / carrier converter card provides the ability to install 2 PMC cards into a standard cPCI slot. The cPCIBPMC6U-ET is an extended temperature design. -40C to +85C standard. Conformal Coating is an option. |
DinTerm64 DINterm64 provides a space efficient, low cost method of interconnecting the control electronics to the rest of the sensors, IO, machinery etc. |
| |
PCI2cPCI-32 PCI2cPCI-32 Install a cPCI board into a PCI slot. This adapter supports 32-bit |
PCI2cPCI-64 PCI2cPCI-64 Install a cPCI board into a PCI slot. This adapter supports 64-bit |
PIM-Carrier The PIM Carrier board facilitates 2 PIM's. The PIM Carrier facilitates rear panel IO in cPCI based systems using PMC's Need a cPCI card..we have those too www.dyneng.com/cpci.html |
PIM-Parallel-IO The PIM-Parallel-IO facilitates rear panel IO. A PIM Carrier is mounted to the underside of the backplane. The Pn4 [PMC] IO is passed through the backplane connectors to the PIM Carrier and to the installed PIM devices. Most PIM Carriers have two PIM sites which correspond to the two PMC's mounted to the host card. The PIM (PMC Interface Module) carrier supports the flexible PIM scheme for PMC rear I/O. |
PIM-Universal-IO The purpose of the PIM-Universal-IO is to facilitate rear panel IO in cPCI systems. A PIM Carrier is mounted to the underside of the backplane. The Pn4 "user IO" on the PMC is routed through the host "carrier" board to the backplane.is passed through the backplane connectors to the PIM Carrier and to the installed PIM devices. The PIM (PMC Interface Module) carrier supports the flexible PIM scheme for PMC rear I/O. |
cPCI-J2-SCSI cPCI-J2-SCSI connector board[CompactPCI] |
HDEcabl68 SCSI II/III cable - 68 pin high density SCSI connectors with latch blocks or 2-56 thumbscrew hardware in 3 ft. and 6 ft. lengths. Twisted pair construction. Use with PMC hardware such as Dynamic Engineering's PMC-parallel-IO etc. |
| The DINribn64 cable set is designed to interconnect devices using 64 connection DIN connectors. Rows A and C are utilized. Many Dynamic Engineering products have this connector system as well as products from third parties for VME systems. Utilize the DINribn64 cable to connect the DINterm64 to the PCIBPMC, PCIBPMCX2, PCI2PMC etc. A snap together breakout system with DIN rail capability is created with these components. You can also use the DINribn64 to interconnect your rear IO VME hardware to the DINterm64 or other breakout device. |
cPCI-Receiver-Controller Digital Radio Receiver Controller with SPI, A/D, D/A, clock references, UART, temperature, fused power |
Return to the Dynamic Engineering WebSite |
